Sewer Camera Head
A camera is one of the vital tools in sewage inspection. Among the different components, the sewer camera head must be properly maintained. A plumber should be aware of when to repair or replace this part.
A sewer inspection camera is a fundamental equipment for inspecting a drainage system. And the camera head can be considered one of the most crucial parts of the inspection system. Plumbers must ensure that the sewer camera head is always in working order.
A faulty camera head results in blurry images. This harms the professional opportunities of a plumber, along with delaying projects. This blog examines the common signs that indicate that a sewer camera head is to be repaired or replaced.
Need for Maintaining the Sewer Camera Head
Sewer camera head maintenance is required so that a correct inspection can be done of the drainage system. This also accounts for preventing system failure, along with avoiding costly emergency repairs.
A camera for plumbers is highly exposed to sludge, grease, and water. Hence, there is a high chance of getting damaged. To prevent this, the need for proper maintenance cannot be emphasized more. Timely repairing or replacement ensures proper results.
Common Signs that Indicate Repairing or Replacing a Sewer Camera Head
There are several instances when plumbers need to replace or repair a sewer camera head. Let’s check out the top signs.
Figure: Common Signs in Sewer Camera Heads That Indicate Repair or Replacement
1. Blurry Images
Are the images from your inspection camera seeming blurry? This is a clear indication of replacing the camera head. But why does such a visual occur? Here are some of the probable reasons.
- Dirty Lens: With continuous use, your camera lens accumulates scratches and dirt. This results in blurry photos, and you might miss any important detail. Daily cleaning can remove the dirt, but the lens must be replaced if there are any scratches.
- Wear Out: The sewer camera head can wear out over time. Hence, you need to repair or replace it.
- Internal Damage: The sensors inside the camera head might get damaged from daily use. This results in image distortion, and a plumber must think about replacing it.
2. Intermittent Video Feed
Your sewer camera head might be replaced if you witness an intermittent video signal. This is seen due to the following reasons.
- Internal Wiring: Due to regular use, the wiring inside the camera head can loosen. This results in an intermittent video feed.
- Loose Connection: You might not get a proper video signal if there is a fault in the connection between the sewer camera head and the cable. Such a loose connection accounts for intermittent video signals.
- Cable Wear: With extensive usage, the cable in the camera for plumbers can get worn out. This brings an interruption to the video feed.
3. Physical Damage
A plumber must think about repairing or replacing the sewer camera head if it has any noticeable physical damage. Let’s check out the top reasons.
- Cracks: A camera head must operate in harsh conditions. This results in cracks or dents. In such a case, this component must be replaced.
- Housing Tear: What protects the internal parts of a camera head? The outer housing. The entire component is to be replaced if the outer housing is subjected to wear and tear.
- Lens Damage: Among the different parts in a sewer camera head, the lens is important to capture clear photos. Well, the camera head is to be repaired or replaced if there is any crack on the lens.
4. Black Screen
There might be an instance when you witness a black screen in a camera for plumbers. But why does such an incident take place? Here are the main causes.
- Signal Failure: For a smooth operation in a drainage inspection camera, a proper signal is required to transfer the image/video from the camera to the monitor. Any failure in this case results in a black screen.
- Dead Internal Components: You might witness a black screen if there is a dead internal component. Here, you must replace the sewer camera head.
5. Moisture Inside the Camera Head
Your drainage inspection tool can be damaged if there is moisture inside the camera head. The main causes are stated below.
- Foggy Lens: Your camera lens is going to be foggy, which indicates the presence of moisture. This obstructs the view of the camera. Hence, the head is to be repaired.
- Corroded Parts: Moisture accounts for corroded internal parts. This results in the malfunction of an inspection camera.
How to Detect the Damage in Camera Heads?
Here are some of the ways that help you to understand that a camera head is damaged and that you need to replace it.
| Symptoms | Visual Clues |
| Black screen | No LED light |
| Blurry photos | Cloudy lens |
| Flickering video | Sudden video drops out |
Table 1: Visual Cues to Understand Damaged Camera Heads
How to Fix Different Symptoms in a Sewer Camera Head?
A sewer camera head is to be replaced when certain signs are seen. Let’s talk about some quick fixes.
| Signs | Fixes |
| Blurry photos | Cleaning the lens |
| No video signal | Checking the power source and the cable |
| Light not turning on | Replacing the light board |
| Flickering feed | Checking joints |
Table 2: Signs and Fixes
These fixes might not solve the problem, but you will understand whether a camera head is to be replaced or repaired.
Repairing vs Replacement
Replacement is expensive. Well, you do not need to replace the sewer camera head if there is a scope for repairing.
| Condition | Repair or Replace |
| Cracks | Repair for minor cracks and replace for severe cracks |
| Dirty lens | Repair |
| Broken LED board | Repair |
| Internal water damage | Replace |
Table 3: Repair vs Replace
Tips to Prevent Future Damage
Proper maintenance of the sewer camera head prevents frequent repairs or replacements. Here are some tips that plumbers must follow to combat any future damage.
- Inspect the sewer camera head before and after application
- Don’t force the camera into sharp turns
- Store in a dry case
- Ensure full system inspection half-yearly
To Conclude
Plumbers need to maintain sewer camera heads to avoid emergency repairs, which can be expensive. A sewer camera head is to be replaced or repaired if you see blurry photos, black screens, intermittent video signals, etc. A proper inspection of the camera part must be done before and after work.
Replacing Your Sewer Camera Head
Are you witnessing blurry images in your camera? This is an indication of a faulty sewer camera head. Hence, it must be replaced or repaired. Choose a reputable plumbing equipment supplier if you think about replacing it.
About the Author
